Medical Air Systems Inc., specializes in medical gas and medical gas equipment
Medical Air Systems Inc., specializes in medical gas equipment

Features

Elliminates hoses and wires that clutter the floor.

Provides ready access to medical gas and electrical services near the point of use, where they are needed.

Provides the maximum in services, including medical gases, nitrogen, electrical and grounding receptacles, and four I.V. hooks.

Strong 18 gauge stainless steel shell.

Up to 10 medical gas outlets for operating rooms and recovery rooms in either Quick - Connect or DISS styles.

Automatic return of handle to the locked position for safety, when released.

Medical Air Systems Inc., specializes in medical gas and medical gas equipment

 

Specifications

Where indicated on the drawings, provide Manually Retractable Ceiling Mounted Service Columns for operating/delivery/cysto, Recovery/ICU-CCU rooms.

Retractable ceiling columns shall be constructed of 18 gauge stainless steel. Bottom plate shall be 14 gauge stainless steel with welded seam, ground smooth for seamless appearance with No. 4 satin finish. D.I.S.S. medical gas pipeline fittings will be furnished in the structural mountings plate; internal flexible hoses shall be furnished in the ceiling column for final connection between the mounting plate and installed medical gas outlets.

The column shall incorporate a constant force spring mechanism that will provide a power-assist for retraction and maximum extension of up to 18 inches. Fully extended it shall be 54 inches long. 36 inches long shall be the fully retracted length. It shall have a spring-loaded friction brake that maintains the brake in locked position to avoid unwanted movement until intentionally unlocked with a quarter turn of the smooth surface, closed loop handle located on the bottom of the column. The column shall also contain (2) 3 inch stabilizing rollers in each of 4 corners, located in the retracting shell to assure smooth retraction and extension Rollers shall secured by stainless steel brackets welded to the retracting shell.

The electrical contractor shall provided electrical wiring to factory installed electrical receptacles as indicated in the Table of Accessories.